1KG ABS2.0 Filament Refill - Geomagnetic Mauve

A super sparkle purple.
SKU: ABS2_0175GM
$34.99

This filament uses low warp technology. Many others have created "gimmicks" to low warp by mixing other polymers to reduce the warping. This new ABS technology is truly low - no warp without the use of modifiers or fillers. It also doesn't smoke or smell when printed.

*NOTE* You must print the refillable spool below to use the refill coils
The refillable spool can be found on Thangs

Appearance: Matte

Resin: ABS2.0

Extrusion Temp: 245c@65mm/s
Flow Rate: 30 - 65mm/s
Bed Temp: 90c - 100c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)
Diameter: 1.75mm