1KG HTPLA+ Filament Refill - Heavy Water Blue

Heavy Water Blue was born out of a the deep recesses of the ocean. It is made from Natureworks 3D870 resin.
SKU: 870175HWB

*NOTE* You must print the refillable spool below to use the refill coils
The refillable spool can be found on Thangs

Resin: 3D870
Extrusion Temp: 220c@30mm/s 245c@100mm/s
Flow Rate: 30 - 100mm/s
Bed Temp: 50 - 75c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)
Diameter: 1.75mm