1KG HTPET+ Filament - Radiated Fog

*Note: Please ensure compatibility with your printer.. Material needs to be kept dry for best performance. This material is BPET, NOT PETG

We recommend drying your filament once delivered. HTPET+ is extremely hydroscopic and will absorb moisture through the vacuum bags even when perfectly sealed.

We have updated the name of this product from PET to HTPET+
Please be aware that some existing spools may be labeled as PET, but are in fact HTPET+.

Why should I use HTPET+ ?

• HTPET+ is a PETE polymer, the same plastic used to make soda pop bottles.
• It has a glass transition temperature of 82c.
• It is a non-warping resin.
• It is annealable same as most PLA's.
• It has similar heat resistance to ABS without annealing at 87c.
• It doesn't have the same issues as PETG does. It doesn't glob, it can print at 100mm/s or higher speeds.

A darkened clear sparkly filament for using in the most demanding situations.

We do offer customer created PrusaSlicer profiles in two variants:

1. Prusa MK3

2. Ender 3 with modified all metal hotend

This product is not recommended for use in extruders with PTFE liners, for best results use with all metal hotend

Resin: BPET
HDT: 87c (100c annealed)
Extrusion Temp: 270c@30mm/s 285c@100mm/s
Flow Rate: 30 - 150mm/s
Bed Temp: 80c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)
Diameter: 1.75mm
Spool Type: Standard Spool