A very sparkly and bright semi-translucent orange.
This filament uses low warp technology. Many others have created "gimmicks" to low warp by mixing other polymers to reduce the warping. This new ABS technology is truly low - no warp without the use of modifiers or fillers. It also doesn't smoke or smell when printed.
Resin: ABS Extrusion Temp: 245c@65mm/s Flow Rate: 30 - 65mm/s Bed Temp: 90c - 100c (with PEI / Ultem, or Glass with Hairspray or Glue Stick) Diameter: 1.75mm