A simple grey filament for everyday use. It is created using pure Natureworks 4043D resin.
Resin: 4043D Extrusion Temp: 220c (recommended 10C hotter than most other brands of PLA) Flow Rate: 30 - 80mm/s Bed Temp: 50 - 75c (with PEI / Ultem, or Glass with Hairspray or Glue Stick) Diameter: 1.75mm Spool Type: Standard Spool
*Please note* This is pure 4043D without additives and fillers, therefore it prints a little different than typical PLA's. Tuning may be required.