This red is translucent with a hint of pearl. It is made from Natureworks 4043D resin.
Resin: 4043D
Extrusion Temp: 220c (recommended 10C hotter than most other brands of PLA)
Flow Rate: 30 - 80mm/s
Bed Temp: 50 - 75c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)
Diameter: 1.75mm
Spool Type: Fusion Filaments Refillable Spool
*Please note*
This is pure 4043D without additives and fillers, therefore it prints a little different than typical PLA's. Tuning may be required.
