1KG PLA Filament Refill - Tritium Green
Tritium Green. A green with lots of sparkle!
Extrusion Temp: 220c (recommended 10C hotter than most other brands of PLA)
Flow Rate: 30 - 80mm/s
Bed Temp: 50 - 75c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)
This is pure 4043D without additives and fillers, therefore it prints a little different than typical PLA's. Tuning may be required.
The refillable spool can be found here: https://www.thingiverse.com/thing:31643
Or purchased from our store here: https://fusionfilaments.com/collections/standard-pla-refill-spools