1KG HTPLA+ Filament Refill - Prussian Orange

A unique orange that we like to call "That Orange". It is vivid and bright and packed full of orange color.
SKU: 870175PO

*NOTE* You must print the refillable spool below to use the refill coils
The refillable spool can be found on Thangs

Resin: 3D870
Extrusion Temp: 220c@30mm/s 245c@100mm/s
Flow Rate: 30 - 100mm/s
Bed Temp: 50 - 75c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)
Diameter: 1.75mm

Customers who bought this item also bought

1KG HTPLA+ Filament - Nuclear Winter White 2.0

It is created using Natureworks 3D870 resin. A bright white for everyday use

1KG HTPLA+ Filament - Supercritical Brown

A brown with a slight shimmer. It is created using Natureworks 3D870 resin.

1KG HTPLA+ Filament - Tritium Green

Tritium Green. A green with lots of sparkle!

1KG HTPLA+ Filament - Mushroom Cloud Grey

A basic grey for everyday use. It is created using pure Natureworks 3D870 resin.
Existing reviews
Easy to dial in but might have some pigment issues
This was my first experience with Fusion HTPLA+ filament. It printed well as far as overhangs, layer lines etc. Although it had some issues with dark specks\spots in the print that looked like debris or maybe some small particles of the pigment. Didn't ruin the print by any means, but didn't look the greatest either. Besides the specks in the print, there were groups of layers that appeared a bit darker than others. Almost like there was a bit more pigment in that length of filament. I looked at the filament on the spool after I noticed the spots in print and seen what I thought was some kind of dust. However after trying to blow it off with can air and the trying to wipe it off I realized that it was specks in the filament itself. If this filament was used for a business I wouldn't be willing to send the print to the customer with the way it looked. I have better hopes for the 5 rolls of Fusion black HTPLA+ filament (3 Ionized Cobalt Black and 2 Carbon Rod Black) that I bought because these colors defects won't show up. I just hope that if my black rolls have the same issue, that the particles aren't large enough to cause a nozzle jam during the print. Maybe this is a one-off experience. I hope so for Fusion's sake because I want them to succeed. It's always nice to have another option for filament that is made in the USA. I really like the reusable spools! The refill roll fit perfectly over the spool that I printed.
Sean | 10/31/2022 11:44 PM
Was this review helpful? Yes No (0/0)
Write your own review